FORScan for Making Changes To Truck

[Brokenhandle]

Just bought a 2021 Traverse that has the auto stop start feature... hate it. And no button that I've found to turn it off... so will do some checking.

Ryan

 

[chopsaw]

It's in the dash, but the damn thing resets every time you stop the truck.

I just looked , and mine doesn't have the thing at the battery acc plug . Mine is still on the 2018 factory battery .
Either way , if mine has the device at the switch in the dash , or was disabled with a tune , or it can be disabled in the software , mine does not reset when I turn the switch off .

 

[BrianGSDTexoma]

I did it that way in my first 2018 F150
Used Forscan in the one I have now.

You may have the little ASS (auto-stop-start) delete thing that attaches up by the battery.

I could not find that seatbelt anywhere. I looked through all the modules. I going to try Rich's way.

 

[radioguy]

I use Forscan for my 2015 F250, Replace the little 34 gallon fuel tank with a 60 gallon. Needed to change the size for all the fuel calculation. 2015 is a strange year, not able to set the DTE (distance to empty) multiplier. Still have to figure out how to identify and delete key entries. The wife has lost a few and now I can't get remote start to work on the latest replacement.

RG

 

[chopsaw]

. Still have to figure out how to identify and delete key entries. The wife has lost a few and now I can't get remote start to work on the latest replacement.

Should be in the setup software . I'll look here in a minute . I remember it was hard to find . I got into it when I bought my '18 . Changed the door code to the same as my '05 . I remember seeing stuff about keys .

 

[mike243]

Only thing I would like to change is the speed limit, it is set at 95, it has the 5.0 and my 02 6 cylinder is 97 can’t have no v6 outrunning a coyotee

 

[Hijack73]

I could not find that seatbelt anywhere. I looked through all the modules. I going to try Rich's way.

Future reference

 

[Hijack73]

This is probably my favorite Forscan mod. Global windows (fronts only, but man is it nice)

also radioguy - I think what you are looking for is in the BCM

 

[nlife]

I don't mind the auto stop start, what I really hate is the poor mans traction control Ford uses. Got me stuck a few times when things got gooey and I ground to a halt after the brakes came on from the tires spinning in the mud.

And I can't get the wife to be lighter on the gas in the winter. Chews the rear break pads off in a hurry.

Yea there's a button to disable it, but I don't usually think about it until it's too late.

This is probably my favorite Forscan mod. Global windows (fronts only, but man is it nice)

also radioguy - I think what you are looking for is in the BCM

View attachment 701981

I was going to post the exact same thing. I have an '18 xlt and that feature was only available on the higher end models. Well, that is until I found FORScan.

 

[Winterrider]

chopsaw , 2019 Ford Limited, may have to try that. Is it doable for passenger seat do you know? Driving around back roads while hunting, or A-B ice fishing, chimes all the time with rider. Have hooked belt behind our backs but PITA

chopsaw ,Tried this little trick. Got the passenger side set I think, Haven't had anyone sit yet and move but got the dude sitting to flash. Driver side will not do that, have tried at different times about 1/2 doz times. Push button start (no key) but wouldn't think that would matter. Just pushing ( not holding) the start button is same as accessories. Oh well, will see if worked on shotgun side

 

[BrianGSDTexoma]

chopsaw ,Tried this little trick. Got the passenger side set I think, Haven't had anyone sit yet and move but got the dude sitting to flash. Driver side will not do that, have tried at different times about 1/2 doz times. Push button start (no key) but wouldn't think that would matter. Just pushing ( not holding) the start button is same as accessories. Oh well, will see if worked on shotgun side

I got lucky and worked first time but I did have to press 4 times before light came back on but I have key. Good luck.

 

[chopsaw]

Push button start (no key) but wouldn't think that would matter. Just pushing ( not holding) the start button is same as accessories. Oh well, will see if worked on shotgun side

Doors unlocked , parking brake on .
Make sure your foot isn't on the brake .
Push the button ONCE . Twice is run . Once is acc .
Wait for the light to go out , then you have about 30 seconds to do the first 3 .
Light comes back on
One more click in / out
light flashes .

Doors unlocked , no foot on the brake . If you step on the brake out of habit , get out of the truck , then back in .

I have the key start , but took me a couple tries to get it , but it works . I would love to have the remote window thing , but looks like you need the program for that .

 

[Winterrider]

Doors unlocked , parking brake on .
Make sure your foot isn't on the brake .
Push the button ONCE . Twice is run . Once is acc .
Wait for the light to go out , then you have about 30 seconds to do the first 3 .
Light comes back on
One more click in / out
light flashes .

Doors unlocked , no foot on the brake . If you step on the brake out of habit , get out of the truck , then back in .

I have the key start , but took me a couple tries to get it , but it works . I would love to have the remote window thing , but looks like you need the program for that .

Didn't have park brake on, but will try things again. I don't give up that easy .
Like I say, passenger side seemed to take it alright.

 

[Winterrider]

chopsaw , the park brake seems to have been the ticket this go-around. No more irritating chimes. Thanks for the tutorial

 

[chopsaw]

Good deal . I didn't list that the first time , because I didn't know it mattered . Love that electronic brake BTW .