• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

first cold smoke Part 1

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

kennymn

Meat Mopper
Joined
Mar 22, 2006
Messages
156
Reaction score
10
Location
ALBERTVILLE MN
Built this smoke generator out of 2 unused paint cans , ( 1 - 1 gallon and 1 pint , 1 - 2lb coffee can ) 1 can of sterno , 2 - 4" elbows , 8' - 4" expanable tubing , the pint can holds the wood chips and it is bolted into the top can ( the bottom of top can is removed ) and the sterno sits inside of the bottom can . Light the sterno put chips into pint can put lid ( with 2 -3 small holes in it ) on and set the top can on to bottom can and connect tubing to the lower vent of a GOSM smoker and you are ready to smoke . ( Remove lower vent adjuster and a 1 gallon lid is the same size as the vent opening . )
I smoked 4 different types of cheeses mild cheddar , mozzarella , marable cheddar , and pepper jack , skinless hot dogs , braunschweiger , and some spam . Smoked for 2 hrs. with alder chips . The cheese had a definite smoke taste hot dogs , spam , and braunschweiger had a slight taste of smoke , but all was good for first time . ( Part 2 will follow )
7d222fc8_vbattach17761.jpg

9a389771_vbattach17762.jpg

f016f3e8_vbattach17760.jpg

bcdfcfb1_vbattach17759.jpg

08408848_vbattach17758.jpg
 
Cool idea. Looking forward to seeing the end result.
Andy.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky