First butt and on a kettle snake method

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Caleb7mm

Newbie
Original poster
Jun 13, 2020
1
2
Never smoked on a kettle grill before. Watched 2 videos and decided to give it a try.
I will make my snake smaller next time. 3 rows instead of 4. My temp was a little higher than I wanted throughout half the process. I ended up pulling a bunch of briquets off the snake after about an hour.
Used mustard as my binder for the rub. And pecan wood for the smoke.
I used apple juice in my drip pan. Sprayed the meat down 3 times during the process with apple juice to keep it moist. I Double wrapped in foil after hitting 160 internal temp. I put some apple juice in the foil with the shoulder and sealed it up.
I let the heat get it to 200 internal temp then let it rest under loose foil for 20 minutes and pulled it.
SUCCESS!!
My snake got a couple inches from the end at 200 degrees internal temp. Perfect!
Came out perfect and it will be gone before tomorrow.
DD07DF30-9048-4945-A604-FE55F71DA496.jpeg
6CC62630-DE17-43B6-B507-2DA800E0A675.jpeg
386FA494-EF13-4119-84BC-021BFF6D4EAC.jpeg
7312DA00-5539-4888-A3D8-B0C782756AAC.jpeg
2E152AFA-E949-48F6-BBCE-E244E6D10AB1.jpeg
049FCC14-888C-435E-80C2-C7FBF3E9CFC5.jpeg
707BEE79-1A61-4F06-9276-C956F732EFBF.jpeg
 
Good job! Remember to save the juices from the foil. Just separate out the fat, and reintroduce to the meat after pulling. It will soak right up.
 
  • Like
Reactions: Caleb7mm
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky