• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

first brisket is it really done?!?!

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

kevinpn

Newbie
Joined
Apr 24, 2014
Messages
4
Reaction score
10
Been smoking lots of things, Pork, chicken, ham.   I get that i need patience thats not an issue for the stall.  I hit my 6# brisket yesterday with my rub and it was on the mini-wsm this am at 5.  I have an igrill2 that i use on my butts and chicken i know its accurate.  smoker running steady between 240-250.  175 hit at 8:41 am, wrapped in 3 layers of foil back on the smoker. 205 hit at 11:45am, it is now in a SS pan covered in foil and wrapped in towels and a blanket, ( we are in an RV and the cooler is used for the beer, cant let the beer suffer and get warm!).  So here is the question 7 hours and NO stall.  I was watching for it, i wanted to time it for my log, this seems really quick to be done with all that I have read on here regarding brisket.  Do y'all think it will come out as it should?  Dinner is at 6pm and I wanted to give my self time for the stall etc...
 
6# Brisket flat only?

Hour/Pound is kind of quick but not crazy for a flat @ 250 degrees. If it's IT was 205 and it was probe tender I don't see any reason to doubt what you're seeing.

I'd imagine it will be just fine. Every piece of meat is different. I've never had briskets fail to stall but I don't see any reason why they couldn't.
 
Last edited:
A stall is kind of normal, but not Gospel. Consider yourself lucky and get that beer back in the cooler!

Dan
 
Since that brisket weighed only 6 lbs, it's not a big surprise that you didn't get a stall cooking at 250*. In my experience, smaller chunks of meat are less likely to stall at all, or will have only short stalls. I'd venture to guess that when you smoke a 12-16 lb packer, you'll be more likely to expect a stall.

Red
 
I agree. For a 6 pound brisket I think 7 hours is plenty for to get it done when cooking at 250ish. 
 
Thanks guys!  I'm gonna run an errand and then get back unwrap the fella and carve it up!  Ill post a pic then.
 
Wrapping in foil helps push thru/avoid the stall even more so with a smaller cut.
Hope it turns out,will be waiting for pics!:drool
 
It turned out great! Gonna find a full packer next time. The wife loved it.

 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky