I am getting ready to build a trailer smoker, this is my first build so I want it to be correct. I have done some research and would like someone whos done a build to double check before I proceed with fabrication. Below is what I have came up with using the feldon calculator. This will be a reverse flow. If anyone has some good links to builds or has any good advise to give would be greatly appreciated!
-CC dimensions=33" dia.x 72" L.
-FB dimensions=26"H x 33"W x 24"L
-Chimney= 6" pipe x 36.43" Long
-Intake= 6" length x 1", (10-11 needed)
-FB/CC opening= 20.48" half moon
(164.74sq.in.)
-Would a round firebox box be more efficient than a square or rectangle one?
-How high should the baffle plate be above the firebox opening?
-What would be an acceptable height between the baffle plate and cook grate?
TIA- Rod-
-CC dimensions=33" dia.x 72" L.
-FB dimensions=26"H x 33"W x 24"L
-Chimney= 6" pipe x 36.43" Long
-Intake= 6" length x 1", (10-11 needed)
-FB/CC opening= 20.48" half moon
(164.74sq.in.)
-Would a round firebox box be more efficient than a square or rectangle one?
-How high should the baffle plate be above the firebox opening?
-What would be an acceptable height between the baffle plate and cook grate?
TIA- Rod-