Dimensions of Collector

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

BeppeSamm

Newbie
Original poster
Apr 5, 2022
5
0
Hi all. I'm designing a 250 gallon propane tank style standard flow offset smoker - it's 30" diameter and 87" length. For the smoke stake, I'm using a 7" diameter stack which will be 55" in length (40" above the CC) - it will be screwed onto the collector and removable. For the collector, I've seen several offsets (mainly inspired by Aaron Franklin) where the collector wraps across the entire diameter of the dome part of the cook chamber. My 250 gallon propane tank style smoker will have a 30 diameter. I thought of using a collector with a depth / width of 24" (and 15" on the back plate), a length of 18" and a height of 10". Do these figures
make sense? I'm attaching a picture with the detailed dimensions.

Collector.JPG
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky