Toggle sidebar

Charcoal Pan Paint Chips

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
jdehority

jdehority

Newbie
Original poster
Jul 1, 2012
1
10
I was working through some mods on my ECB and I was drilling holes in the charcoal pan to increase air flow.  While doing this, the black enamel chiped quite a bit around the holes I drilled.  Any downside or future problems because of this?
 
welcome1.gif
I wouldn't worry about it.  Smoke on!
 
You must log in or register to reply here.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Similar threads

H
Running a Shirley 24X36 with charcoal and wood chunks instead of wood splits?
Replies
4
Views
6K
Charcoal Smokers
Chasdev
Chasdev
R
My Journey
Replies
2
Views
881
Wood Smokers
Jim_C
Jim_C
chopsaw
New Goodwill pan . Tater tot hotdish ?
Replies
22
Views
1K
General Discussion
MJB05615
MJB05615
A
Searching for a oven smoked brisket video using Lapsang tea, black cardamom, mushroom soy and activated charcoal — anyone seen this?
Replies
6
Views
1K
General Discussion
astig
A
I
Built a new smoker couple of weeks back.
Replies
10
Views
2K
UDS Builds
irvin78787884
I
rgreenberg2000
Vent placement, electric smokehouse
Replies
4
Views
6K
Smoke Houses
rgreenberg2000
rgreenberg2000
philpom
Camping and cooking
Replies
5
Views
5K
Blowing Smoke Around the Smoker.
BrianGSDTexoma
BrianGSDTexoma
chef k-dude
Carolina (inspired) Mustard BBQ sauce
Replies
7
Views
866
Sauces, Rubs & Marinades
chef k-dude
chef k-dude

Latest posts

Hot Threads

Top Bottom
Back
Clicky