build a reverse draft offset smoker

[Perkasv]

Hello.. I'm going to build a reverse draft offset smoker. Is there any thread on the forum. As you can follow a building with pictures or some good video.

 

[gmc2003]

Here's one. I'm sure there are many others. Just use the search.

New build first reverse flow

First and foremost no making fun of my lack of welding and fabrication skills. I built a vertical offset that I current use. I wanted a smaller offset for smaller smokes and taking camping so I came across an expansion tank and started. Let me know if anything is too far off. CC is fairly...

www.smokingmeatforums.com

Chris

 

[civilsmoker]

Look under the reverse flow section of the forum. There are many many many to study for help.
https://www.smokingmeatforums.com/forums/reverse-flow.201/

Also review the tutorial sticky before you get started. It has a wealth of tested and proven info.
https://www.smokingmeatforums.com/t...moker-how-to-calculate-build-tutorial.268692/

I'm partial to this build for some reason......
https://www.smokingmeatforums.com/t...h-vertical-cabinet-aka-the-copper-pot.268790/