blade for rival grind-o-matic

[yount]

I have a old grinder here that my dad gave me we used to use it alot when i was a kid but somehow the blade got lost does anyone know where to get them it is a rival grind-o-matic 2100 thanks

 

[beer-b-q]

Do you have a picture of the grinder, I may have one...

 

[yount]

http://kitchen.manualsonline.com/mim...a7277974.pjpeg here is a pic of the manual i can post a pic of the actual grinder itself if this wont work have to go get it thanks

 

[beer-b-q]

Are you needing the grinding plate or the cutter blade? If you have a grinder plate give me the measurement of it or the diameter of the opening it fits in...

 

[yount]

i need the cutting blade the measurement is 2 1/16 in side the housing

 

[beer-b-q]

One more question, does it have a 7/16" or 1/2" square hole?

 

[yount]

ok the square on the end of worm where the cutting blade would go is closer to 5/16

 

[beer-b-q]

Let me do some digging and see what I can find in my junk parts drawer. I have been collecting meat grinders for years and never through away a part I may need.

 

[yount]

thank you very much your help is much appreciated

 

[beer-b-q]

I don't have any that small, however I did a little research and I believe that one from an Oster unit is the same... I have a working Oster and I checked the blade and plates, they measure the same.

I found this on ebay you might check it out...
http://cgi.ebay.com/Oster-Kitchen-Ce...d=p3286.c0.m14

http://cgi.ebay.com/OSTER-KITCHEN-CE...d=p3286.c0.m14

http://shop.ebay.com/?_from=R40&_trk...All-Categories

Let me know if you need more help...

 

[yount]

Thank you very much for your help.It is greatly appreciated.I will order the oster blade and let you know if it works thanks again.

 

[beer-b-q]

Glad to have been of some help... Good luck.

 

[scarbelly]

Here is a link that have always found the parts I have needed for small appliances
www.TheGourmetDepotCo.com
This one used to be culinary parts warehouse
Good luck

 

[yount]

I know this is a old post but figured id report back the blade did work will be grinding some pork up for some kielbasa this weekend

 

[beer-b-q]

Was it the one for the Oster or a different one?

 

[yount]

yeah the oster the one that you linked me too thanks again

 

[mamaroof]

Just found a Grind O Mat at a thrift store.

It is missing the ring collar that holds the grinding blades in.

Any idea where I might be able to find one?

Thanks!