Bear’s Smokers FREE to good homes. ALL GONE !!!

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
Bear, sorry to hear about your health and all the best wishes. I know you will find a good home for the smokers. The weber Q does a good job to and you know how to use it!
 
Sorry about your health problems and Thoughts/Prayers for you!!!! Wish I was closer to nab one, or to help out you keep rolling smoke. Being the youngest of 5 kids, I am good about doing what I am told :emoji_laughing:
 
As a long time lurker and now member your posts have been invaluable to me and my smoking journey. Whenever I see a post from you I know the info within is reliable and quality.

this is a sad day indeed, I hope you remain to impart your wisdom.

Stay healthy, and thank you from the U.K.!
 
A kind jester bear wish I was closer I would drop off some q from time to time. Try to stay healthy and above ground your posts on here have inspired many cooks.
 
That's a great thing for you to do Bear! You personally may not be able to use them and smoke with them but you will still be smoking for many years to come! Although it will be through others that have learned alot from you... I know I have!

Ryan
 
Brother sorry to hear that!! Got the word yesterday from the VA have the big C & was suppose to do an open MRA today LOL
Richie
You take care and keep using your new toys

Man Richie sorry to hear this. Hang in there they are improving everyday on beating the big C.

Warren
 
Dang man its hard to take down the shingle but I too know and understand what you are going through. Not as in such a health bine as you but do have my issues as many of us aged have. Looking for a surgeon to help me now.
Thanks for all your support and help through my time as a SMF member.

Warren
 
Dang Brother, I hate to hear about the challenges you've been facing. Nice of you to try to pass on your equipment to others so that they may experience the joys of smoking you enjoy. I hope things improve for ya or at least make things easy on ya from here on out. Keep fighting the good fight.

Thank You!!
The stuff I got doesn't improve.
Not getting worse real fast is about the best we can hope for.
Meanwhile I try to do everything right.

Bear


Sorry to hear this Bear. You're the reason I joined SMF. I have benefited greatly from your recipes. Enjoy the sun and breeze and stay safe & healthy.

Thank You Max!!
I love to help others, and real glad you have been one of them.
Appreciate the nice comments.

Bear


Awful Nice of ya bear, I dont need any but I'm sure someone will put them to good use.

Thank You Jim!!!
I hope you're right, because if I go before the smokers, they will surely end up in the Dumpster. Bear Jr is a Big Green Egg Lover.

Bear
 
  • Like
Reactions: MadMax281
Bear’s Smokers FREE to good homes.
( MES Gen #1, Gen #2, and Gen #2.5)

OK Guys & Gals, due to Health problems beyond my control, I just can’t safely get out there enough to use my Smokers. I can get out there occasionally to use my Weber “Q” Gas Grill, but not very often. So I’ve decided to give my 3 Masterbuilt Electric Smokehouses away to my SMF Friends. So the 3 Smokers are listed & shown below. Anybody interested, let me know, and if there are more than 3 guys interested I’ll decide who gets them, If anyone wants more than one of them, we’ll wait until the others aren’t wanted by others.

NOTE: I'm located near Macungie, PA.
Address & directions will be furnished to pick up.

No Shipping or delivery included. You would have to pick yours up here.
The "ZERO Cost" should help with the travel expense of getting here & back.
If nobody from SMF wants them, I’ll probably list them for a Low Price, and sell them.

====================================================

MES 40, Gen #1:


This is an MES 40 Gen #1, all SS, with RF Remote Control & Glass window in the Door. This thing worked Great for 5 years, and I smoked an awful lot of Great tasting food with that Smoker, until the Heating Element connector corroded off. It was easily repaired with a new connector & a little solder (Less than $2 cost). This Smoker still works Great, and has been sitting in my Garage since 2013, as a Back-up to my Generation #2.5 MES that I’m currently using.

This Gen #1 should be good to go as is, or you can mod it however you may want.
View attachment 500325


Inside---Racks are like new, and stored inside house. RF Remote Control included:
View attachment 500326

=====================================================

MES 40 Gen #2:


A few months after my Open-Heart Surgery, I was asked by Masterbuilt if I would be willing to test their new Smoker, if they would send one to me. They said there was mixed reviews on it, and since I was well versed on the Generation #1 Smoker, they would like me to test it out, and give them an honest review of it, comparing this Gen #2 to my old Gen #1. They would also like any suggestions as to what I would do to improve it, if anything. I agreed to do the testing, and it was delivered that week.
I put it together, and swapped positions with my Gen #1 on my Smoking Porch. It had a problem with the control, but I managed to get it up to temp, and did all kinds of tests, mainly for balance of heat from left to right, and some from different heights in the smoker. After a few days of testing, I notified MB, and told them what I had found. They were going to send me a new controller, but I told them not to bother, because the heat differences were too much for me to want to use this Smoker, and I’ll just go back to using my Gen #1.
However I told them I would still give them my suggestions to improvements that could be made:

Improvements I suggested:
#1 Get rid of the slanted Drip Plate with the small water pan hanging from it.
#2 Replace that Drip Plate with a full width Water Pan, similar to what is in the Gen #1 Smoker.
#3 Remove the Top vent in the left side wall, and put a top vent like the Gen #1 has, but in the left side of the Top, instead of the Right.
#4 Leave the door hinged on the left side the way the Gen #2 is, instead of the right side, like the Gen #1 is.

They thanked me for my testing, reporting back, and for the suggestions, and told me they would send me one of their new model, that would have some of my changes included in it. I wasn’t too sure that would ever happen, but sure enough, I got it.



This Gen #2 has a Problem with the Control. I would suggest getting a PID to control it, and if you like the way it heats, leave it alone. If it doesn’t heat evenly enough for you, I would suggest removing the slanted Drip plate & the small hanging water pan. Then I would put the bottom grill rack in place, and put a Foil pan on that rack as a Water pan & Drip pan. (Caution: Not too big a Pan!)
Or it could be used strictly as a Cold Smoker Too:

View attachment 500327

Inside---Racks are like new, and stored inside house:
View attachment 500328


=====================================================

MES 40 Bluetooth, Gen # 2.5:


So the one they sent me is the MES 40 Bluetooth “Elite”, all black with the Glass in the door. It has 6 racks in it instead of 4, and it’s without the legs. (Legs wouldn’t work good with my setup anyway)
Every one of the suggestions I made above is incorporated into this smoker, and it seems as though they have served their purpose. I did various tests, mostly temperature balance test, and I couldn’t believe the results. After recording 126 temperature readings overall, I can say that this one outperforms all others in the heat balance department by far, including my Gen #1. The initial over-run is easily eliminated in a very short time, and when I did the testing at my most used Temp of 230°, I found the MES digital read-out to be about 15° lower than my Maverick readings. That’s closer than my Kitchen oven was when I checked it, and I don’t find it a big deal to set my MES at 215° to get my meat to be Smoking in a Temp of 230°.

Now here’s the part I really like. After putting Maverick Smoker Probes on both the Left & Right sides at the same time, I set the Temp to 215°, because I wanted an average of 230° on rack #3. In a very short time the heat stabilized, so that the MES Readout cycled from a low of 213° to a high of 217°. These temps come from the MES heat sensor, which is in the center of the back wall of the smoker. At this same time, the heat on the Left Side was cycling from a low of 228° to a high of 232°. And as hard as it is to believe, the right side was also cycling from a low of 228° to a high of 232°. After watching & recording it for hours at different Temps, I watched this cycling for about 20 minutes. Then tiring from the hours of watching & recording, I took an hour break, and went in the house to my recliner. Then after that hour, I went back out to see what it was doing, and it was still cycling with those exact same temperatures. I had seen enough to make this report, and this is the report I gave to Masterbuilt.

"I couldn’t believe how this Smoker cycled from 228° to 232° for hours, making that average the 230° I wanted, and both sides were the same Temp without using a makeshift heat deflector to balance it out. IMHO, A heat cycle range of 4° is Amazing!!! This is a Great Smoker!!!"
"I did not hook-up to Bluetooth, because I don’t have anything to use with it, and I have no problem going out there to the smoker to make my settings & changes, and I like to check on how much smoke I’m getting at certain intervals anyway. However, my Son said he might have something I can use & he’ll install the App."



This Gen #2.5 Works like a charm, and has since 2013. It is good to go as is, without any Mods.
I have always used an AMNPS (Amazing Smoker) with it.
View attachment 500329


Inside---Racks are like new, and stored inside house:
View attachment 500330

======================================================

So that’s all I got Guys!!

Tip:
Don’t get Old & stay out of Bad Wars!!!
So—After my Open Heart Fiasco, and they screwed everything up inside of me:
First I quit Chainsaw carving about 12 years ago.
Then I quit building Decks about 12 years ago.
Then I quit Hunting & Trapping.
Then I quit Fishing.
Then I quit Driving. (2 years ago)
Now I’m quitting Smoking Meat.
Right now I’m just trying to stay out of the Hospital, or worse, and keep doing what I can, around My Home.


Thanks for stopping By,

Bearcarver
Sorry to hear this Bear. You're the reason I joined SMF. I have benefited greatly from your recipes. Enjoy the sun and breeze and stay safe & healthy.
how nice
.
 
Very sorry to hear this. Paying the smokers forward is a nice thing to do. I'm sure they will find good homes.
Thank you for all your knowledge and sharing. Will we still be hearing from you here?
Best wishes.
 
Bear’s Smokers FREE to good homes.
( MES Gen #1, Gen #2, and Gen #2.5)

OK Guys & Gals, due to Health problems beyond my control, I just can’t safely get out there enough to use my Smokers. I can get out there occasionally to use my Weber “Q” Gas Grill, but not very often. So I’ve decided to give my 3 Masterbuilt Electric Smokehouses away to my SMF Friends. So the 3 Smokers are listed & shown below. Anybody interested, let me know, and if there are more than 3 guys interested I’ll decide who gets them, If anyone wants more than one of them, we’ll wait until the others aren’t wanted by others.

NOTE: I'm located near Macungie, PA.
Address & directions will be furnished to pick up.

No Shipping or delivery included. You would have to pick yours up here.
The "ZERO Cost" should help with the travel expense of getting here & back.
If nobody from SMF wants them, I’ll probably list them for a Low Price, and sell them.

====================================================

MES 40, Gen #1:


This is an MES 40 Gen #1, all SS, with RF Remote Control & Glass window in the Door. This thing worked Great for 5 years, and I smoked an awful lot of Great tasting food with that Smoker, until the Heating Element connector corroded off. It was easily repaired with a new connector & a little solder (Less than $2 cost). This Smoker still works Great, and has been sitting in my Garage since 2013, as a Back-up to my Generation #2.5 MES that I’m currently using.

This Gen #1 should be good to go as is, or you can mod it however you may want.
View attachment 500325


Inside---Racks are like new, and stored inside house. RF Remote Control included:
View attachment 500326

=====================================================

MES 40 Gen #2:


A few months after my Open-Heart Surgery, I was asked by Masterbuilt if I would be willing to test their new Smoker, if they would send one to me. They said there was mixed reviews on it, and since I was well versed on the Generation #1 Smoker, they would like me to test it out, and give them an honest review of it, comparing this Gen #2 to my old Gen #1. They would also like any suggestions as to what I would do to improve it, if anything. I agreed to do the testing, and it was delivered that week.
I put it together, and swapped positions with my Gen #1 on my Smoking Porch. It had a problem with the control, but I managed to get it up to temp, and did all kinds of tests, mainly for balance of heat from left to right, and some from different heights in the smoker. After a few days of testing, I notified MB, and told them what I had found. They were going to send me a new controller, but I told them not to bother, because the heat differences were too much for me to want to use this Smoker, and I’ll just go back to using my Gen #1.
However I told them I would still give them my suggestions to improvements that could be made:

Improvements I suggested:
#1 Get rid of the slanted Drip Plate with the small water pan hanging from it.
#2 Replace that Drip Plate with a full width Water Pan, similar to what is in the Gen #1 Smoker.
#3 Remove the Top vent in the left side wall, and put a top vent like the Gen #1 has, but in the left side of the Top, instead of the Right.
#4 Leave the door hinged on the left side the way the Gen #2 is, instead of the right side, like the Gen #1 is.

They thanked me for my testing, reporting back, and for the suggestions, and told me they would send me one of their new model, that would have some of my changes included in it. I wasn’t too sure that would ever happen, but sure enough, I got it.



This Gen #2 has a Problem with the Control. I would suggest getting a PID to control it, and if you like the way it heats, leave it alone. If it doesn’t heat evenly enough for you, I would suggest removing the slanted Drip plate & the small hanging water pan. Then I would put the bottom grill rack in place, and put a Foil pan on that rack as a Water pan & Drip pan. (Caution: Not too big a Pan!)
Or it could be used strictly as a Cold Smoker Too:

View attachment 500327

Inside---Racks are like new, and stored inside house:
View attachment 500328


=====================================================

MES 40 Bluetooth, Gen # 2.5:


So the one they sent me is the MES 40 Bluetooth “Elite”, all black with the Glass in the door. It has 6 racks in it instead of 4, and it’s without the legs. (Legs wouldn’t work good with my setup anyway)
Every one of the suggestions I made above is incorporated into this smoker, and it seems as though they have served their purpose. I did various tests, mostly temperature balance test, and I couldn’t believe the results. After recording 126 temperature readings overall, I can say that this one outperforms all others in the heat balance department by far, including my Gen #1. The initial over-run is easily eliminated in a very short time, and when I did the testing at my most used Temp of 230°, I found the MES digital read-out to be about 15° lower than my Maverick readings. That’s closer than my Kitchen oven was when I checked it, and I don’t find it a big deal to set my MES at 215° to get my meat to be Smoking in a Temp of 230°.

Now here’s the part I really like. After putting Maverick Smoker Probes on both the Left & Right sides at the same time, I set the Temp to 215°, because I wanted an average of 230° on rack #3. In a very short time the heat stabilized, so that the MES Readout cycled from a low of 213° to a high of 217°. These temps come from the MES heat sensor, which is in the center of the back wall of the smoker. At this same time, the heat on the Left Side was cycling from a low of 228° to a high of 232°. And as hard as it is to believe, the right side was also cycling from a low of 228° to a high of 232°. After watching & recording it for hours at different Temps, I watched this cycling for about 20 minutes. Then tiring from the hours of watching & recording, I took an hour break, and went in the house to my recliner. Then after that hour, I went back out to see what it was doing, and it was still cycling with those exact same temperatures. I had seen enough to make this report, and this is the report I gave to Masterbuilt.

"I couldn’t believe how this Smoker cycled from 228° to 232° for hours, making that average the 230° I wanted, and both sides were the same Temp without using a makeshift heat deflector to balance it out. IMHO, A heat cycle range of 4° is Amazing!!! This is a Great Smoker!!!"
"I did not hook-up to Bluetooth, because I don’t have anything to use with it, and I have no problem going out there to the smoker to make my settings & changes, and I like to check on how much smoke I’m getting at certain intervals anyway. However, my Son said he might have something I can use & he’ll install the App."



This Gen #2.5 Works like a charm, and has since 2013. It is good to go as is, without any Mods.
I have always used an AMNPS (Amazing Smoker) with it.
View attachment 500329


Inside---Racks are like new, and stored inside house:
View attachment 500330

======================================================

So that’s all I got Guys!!

Tip:
Don’t get Old & stay out of Bad Wars!!!
So—After my Open Heart Fiasco, and they screwed everything up inside of me:
First I quit Chainsaw carving about 12 years ago.
Then I quit building Decks about 12 years ago.
Then I quit Hunting & Trapping.
Then I quit Fishing.
Then I quit Driving. (2 years ago)
Now I’m quitting Smoking Meat.
Right now I’m just trying to stay out of the Hospital, or worse, and keep doing what I can, around My Home.


Thanks for stopping By,

Bearcarver
Bear..YOU ARE TRULY LOVED-- Stand Tall & Proud. Thank you for your service to this country--Now go do some fantastic "inside" cooks. Charlie
 
I feel like I'm coming in late, but I wanted to add my condolences to your smoker decision. Perhaps you can branch off into baking or non-smoked charcuterie?
 
Brother sorry to hear that!! Got the word yesterday from the VA have the big C & was suppose to do an open MRA today LOL
Richie
You take care and keep using your new toys


PM sent, My Brother Richie!!

Bear
 
That's awfully darned nice of you John, I'm sure they'll find good homes. I know what you mean about having to quit things, sold my Weatherby high powered rifle last week. RAY

Thank You Ray!!
And Thanks for the Like.

Bear


Sorry to see this John but very cool of you to pass your equipment on. Look forward to seeing your continued indoor cooks!

Thank You John!!
Yup---My Sous Vide Supreme & my Ninja Smart Grill still work, and I can get to them.
And Thanks for the Like.

Bear
 
Geez Bear, Hang in there... Giving up stuff to add years to your life is a good thing... Most of us have done it... I know I'm giving up falling off of flat bed trailers... I did think twice about getting up there.. Should have thought three times...
I hope your health improves....

Dave
 
  • Like
Reactions: chopsaw
Very sorry to read this news Bear.

Like many others I have learned a lot from your posts and appreciate you sharing your knowledge.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky