• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Anyone have experience with Weber igrill 3 thermostat?

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

jacobariel

Fire Starter
Joined
Jun 28, 2021
Messages
32
Reaction score
19
Today I used it for the first time but it is also my first time with gas . I set the gas burner to try to read 350 preheat but went over. I then turned it down but reached lower then 350. I can't find a fine medium.
 
Today I used it for the first time but it is also my first time with gas . I set the gas burner to try to read 350 preheat but went over. I then turned it down but reached lower then 350. I can't find a fine medium.
You need to add a low pressure needle valve to your LP gas line, so you can make slight adjustments.
1625470888999.png


The needle valve is the brass Tee handle valve, they are way more accurate than the valves that come on gas smokers or grills. And they won't break the bank.
I got this picture off of Amazon, here's the link.

Let me know if you need and plumbing or fitting help, I'd be more than happy to help you out.
Dan
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Back
Top
Clicky