AMZNPS Baffle (Worried About Drippings) with pre Q-View

[netbbq]

I've read about drippings into the AMZNPS potentially putting out the smoke.  Here is my "mod".  Cut a 9x9 disposable cake pan in half and overlap them to size.  Use the clips that come with the larger ones (sold at pajama mart) to hold them together.



Little worried about the smoke getting "out" but I suspect that it will find a way.  If it becomes a problem, I figure I could just use 1/2 of the pan and have the open side under the water pan.  I believe I could probably "tent" it to have drippings off the back side.  Also could probably cut holes on the four sides to let smoke out.



Baby Back Ribs with AMZNPS today.  First hot smoke with the AMZNPS.



What do you think?

DSCN0473.JPG

• netbbq
• Nov 11, 2012

DSCN0474.JPG

• netbbq
• Nov 11, 2012

DSCN0475.JPG

• netbbq
• Nov 11, 2012

DSCN0476.JPG

• netbbq
• Nov 11, 2012

DSCN0477.JPG

• netbbq
• Nov 11, 2012

DSCN0478.JPG

• netbbq
• Nov 11, 2012

DSCN0479.JPG

• netbbq
• Nov 11, 2012

 

[netbbq]

I believe that the cover I originally designed restricted air flow a bit too much.  AMZNPS went out after maybe 30 minutes or so.  At least that is what it looked like (not burned too far down the "maze").  So took 1/2 of it away and it is open on one side now.  We'll see how that does.  Now I have two baffles.