Amazin smoker question

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

connie lu

Newbie
Original poster
Aug 19, 2014
3
10
Michigan
Hi All.... Just got the amazin smoker pellet box and going to use it this weekend. I read to start it w/ a tourch.... Any other tips would be approximated. Thank you, Connie Lu
 
Get it burning good before putting it in the smoker.

You want a nice red cherry going.
 
Hi All.... Just got the amazin smoker pellet box and going to use it this weekend. I read to start it w/ a tourch.... Any other tips would be approximated. Thank you, Connie Lu
Connie,

I used mine for the 1st time last weekend and this was exactly my process:

I torch it for 40 seconds through the hole on the side. This will create a flame that will burn. Leave it alone in the wind and come back in 3 minutes to blow on the pellets to get the small flame going again. Repeat this step once more. After torching, blowing until small flame twice, and then waiting 3 more minutes, put it in the smoker. I use an MES30 Gen 1 so I had the flame side of the AMNPS facing towards the back of the unit with the chip tray pulled out a couple inches and the chip loader pulled out a couple inches. 1 row burned for 3 hrs. It was beautiful..
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky