Advice on a triangle shaped grill grate

[mustafghan]

This is my first post!!

I have a brick made grilling spot in my backyard (as you can see from the pic). My problem is finding the correct grill grate for it. I can't find any triangular shaped grilling grate. Any suggestions would be much appreciated as I want to start grilling soon.

 

[krj]

I know there are some grate companies out there that do custom grill grates. They might cost you a little bit of cash to get it done. One the cheaper side, since it looks like you're diy handy, you could always make you own out of flat expanded metal and some angle iron. Or another diy solution would be to find some cheap rectangle grates that are large enough for your project, and then cut them down and reinforce the cut edges.

 

[hawtsauc3]

You need to find an expanded metal sheet and likely cut/fabricate one. Stainless is ideal just don't get galvanized due to health safety reasons. I'm not sure if the link below is actually safe for food, it's just a good example of what type of thing you need, but in the reviews a few people are using it for their smoker, so it will give you an idea on what it looks like as a grill grate.

https://www.homedepot.com/p/Everbil...n-Plain-Expanded-Metal-Sheet-801427/204225784

 

[motolife313]

Welcome to the forum. I can custom fab a grate for you out of mild steel or stainless. Doesn’t say your location tho

Here’s a couple racks on my stainless pit I busted out

 

[mustafghan]

Welcome to the forum. I can custom fab a grate for you out of mild steel or stainless. Doesn’t say your location tho

Here’s a couple racks on my stainless pit I busted outView attachment 395573View attachment 395574

Sweet. I live in DC. I'm happy to pay for your services, etc if reasonable.

 

[motolife313]

Cool. I can’t find the pm button only start a conversation and not sure if that will work.

Some more of my work to make you feel comfortable with the kind of quality of work and it all hand made, my friend let’s me use his machine shop I got a decent setup in my garage also

 

[mustafghan]

Cool. I can’t find the pm button only start a conversation and not sure if that will work.

Some more of my work to make you feel comfortable with the kind of quality of work and it all hand made, my friend let’s me use his machine shop I got a decent setup in my garage alsoView attachment 395575View attachment 395576View attachment 395577

I sent you a PM (started a conversation).