Advice for a new bread board/barbecue board

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

scvinegarpepper

Meat Mopper
Original poster
Feb 23, 2010
191
77
Lowcountry, SC
I recently got a new bread board, well that's what we always called them growing up. It's tupelo. Currently it's raw, no finish at all. This board will be used for a lot of food stuffs, but most importantly, barbecue, or pulled pork as some of you heathens call it. With that said, what, if anything, should I finish it with? When it has barbecue in it, it won't be sitting in there for days. It's just a serving platter, and would be washed out/cleaned afterwards. (sunglasses for scale, didn't have a banana)

gHdSxbB.jpg


8jxNJTL.jpg
 
Saturate it with drugstore mineral oil. Give it all it will absorb. After drying a few days, wipe off any remaining oil. It will then be cured and can be washed after use. I have used this process on wood used around food for years. Gives it a nice finish too.
 
I agree with lamar. Don't spend a bunch of money on "cutting board oil". I use mineral oil too.
You can get a bottle in the laxative section at Walmart for a couple of bucks.
Al
 
Saturate it with drugstore mineral oil. Give it all it will absorb. After drying a few days, wipe off any remaining oil. It will then be cured and can be washed after use. I have used this process on wood used around food for years. Gives it a nice finish too.

I agree with lamar. Don't spend a bunch of money on "cutting board oil". I use mineral oil too.
You can get a bottle in the laxative section at Walmart for a couple of bucks.
Al
Thanks fellas. Got some mineral oil in the kitchen we use on our cutting boards. I can definitely handle that. So just wipe it down really well, like over saturated and let it sit for a few days? Thanks, this is exactly what I needed. Had trouble finding stuff online because I guess "dough boards" are more of a southern thing?
 
Yup you asked and received the best answer to your question. We use that on our cutting boards as well as our bread board. Which in my case is a 2' x 2' flat board that is used to roll out biscuit and pie shells. Very old was my Grandmothers and I'm no spring chicken.

Warren
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky