Okay, so I've been reading quite a few threads and seen many good ideas. I recently came into a 250gal propane tank and I'm gonna give it a shot at building myself a large smoker.
Here's a picture of us loading the tank up, had to drive an hour but they aren't the easiest thing to locate here in upstate SC.
I've started some of the cuts and done all the layout for the FB opening and Doors.
Here you can see I'm trying to make my own hinges before finishing the cutting of the doors
As I've recently purchased this Lincoln 180 DUAL, I'm definitley curious on how it will perform since this entire tank is 1/4"
I'm looking foward to the great support and feedback available on this forum. So let's hear it!
Here's a picture of us loading the tank up, had to drive an hour but they aren't the easiest thing to locate here in upstate SC.
I've started some of the cuts and done all the layout for the FB opening and Doors.
Here you can see I'm trying to make my own hinges before finishing the cutting of the doors
As I've recently purchased this Lincoln 180 DUAL, I'm definitley curious on how it will perform since this entire tank is 1/4"
I'm looking foward to the great support and feedback available on this forum. So let's hear it!