24×60" offset build

[Alberta newbie]

Hey this is my first ever post not really sure what's I'm doing . I am building a 24" by 60" offset looking for advice on door size and placement. Planning on two doors as it is 1/2" steel so very hwavt

 

[daveomak]

Below is a tutorial for an exceptional smoker.... Offset or Reverse flow... the numbers are the same using this tutorial...

https://www.smokingmeatforums.com/t...eady-to-use-rev5-6-19-15.172425/#post_1264161

Doors.... Here's a good start......

 

[Alberta newbie]

Below is a tutorial for an exceptional smoker.... Offset or Reverse flow... the numbers are the same using this tutorial...

https://www.smokingmeatforums.com/t...eady-to-use-rev5-6-19-15.172425/#post_1264161

Doors.... Here's a good start......


View attachment 386462

Thanks