• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

1st Cook

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

khartig

Newbie
Joined
Jun 2, 2016
Messages
10
Reaction score
10
Location
Las Vegas, Nv
Got to fire up the new UDS this past weekend. It perfomed great and it was nearly set and forget. Went with some pork butts since they are quite forgiving and I knew there is a bit of a learning curve.

c79f2498d3b0001d49ab1ff87e25a80e.jpg


Sent from my SM-N920T using Tapatalk
 
They came out great.  Took a bit to get the temp dialed in, but I knew there would be a learning curve.  That give me a good reason to practice.  
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Back
Top
Clicky