Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. beebeque

    Sauce Suggestions for Brisket?

    My 1st brisket will come off the smoker at 4 bells and will rest in the cooler 'til 6 bells. Please give me any suggestions for a finishing sauce or dipping sauce, etc... I'm not sure how I'm going to serve this to my guests after I slice it down.
  2. beebeque

    GOSM Door Thermometer Troubles

    Add a couple of thermometers to the side of the unit and you'll never look at that inaccurate door thermomoter again. Instead you'll know the temps between the top 2 racks and the bottom 2 racks...ya know, the temperature where the the meat actually is! Good Luck!
  3. beebeque

    GOSM Mod - Unplanned!!

    Sorry Meowey. I meant to reply to PotatoC's question about his GOSM door thermometer. I was moving toooo fast!
  4. beebeque

    GOSM Mod - Unplanned!!

    Add a couple of thermometers to the side of the unit and you'll never look at that inaccurate door thermomoter again. Instead you'll know the temps between the top 2 racks and the bottom 2 racks...ya know, the temperature where the the meat actually is! Good Luck!
  5. beebeque

    Baby Back Ribs this AM

    Sorry. Forgot to mention that I didn't use my ET-7. I jst went with my thermo readings from the side of the grill. Nice pix.
  6. beebeque

    Baby Back Ribs this AM

    Sounds like some tailgatin grub is in the works if you're pulling it out at 10:30am. I'll just say that I did the baby backs last Sunday at 225-250 and followed the 2-2-1 to the letter and had unbelievable results. (it was my 1st attempt at baby backs). The meat did BEGIN to pull back from the...
  7. beebeque

    Can it stand the heat..or a bad idea?

    I've got a thick aluminum baking pan with nice high walls that I'd like to use to replace the small smoke box on my GOSM. Any concerns with aluminum? Can it stand the heat or is this a bad idea? Forgive me, I flunked Metalurgy!
  8. beebeque

    How did you come up with your screen name?

    Last name is BEEBE. Great story. What creativity, Huh! Can't wait to hear from SoFlaQuer !!!!!!
  9. beebeque

    GOSM Low Heat Fix (w/pics)

    I can't thank you enough for posting the solution and the pix for the GOSM problem of "running too hot". It was driving me insane!!! I've added the needle valve (and two thermometers to the side-wall) and It worked like a charm. I smoked ribs on Saturday for 6 hours and held a steady temp...
  10. beebeque

    Back from vacation with new Smoke Vault

    I received 2 damaged Smoke Vaults from Amazon (They made good on both.), and 2 damaged stainless steel smokers from Cabela's (They made good on both.). I finally went to Walmart and bought a GOSM...got it home and it was damaged!!!!!! I went back to WalMart and tore open a new box for a...
  11. beebeque

    First Brisket

    MSSD (Mid-Smoke Shrinkage Disorder) is a common, but sometimes embarrassing problem that plagues male smokers of a certain age. The important thing is that you recognize the problem and are seeking help for it. Good luck! (Sorry, I couldn't resist! If a guy didn't make the joke, you KNOW...
  12. beebeque

    GOSM Runs Hot...Thinking of Adding Vent(?)

    Thanks Guys. I've done some arm twisting with the "good people" at CFM and the new regulator is on the way. I knew from reading the forums not to trust the red factory-supplied GOSM thermometer, but I'd never considered the temperaure difference between the top rack and the bottom rack. Last...
  13. beebeque

    GOSM Runs Hot...Thinking of Adding Vent(?)

    Need some opinions please... I've got a GOSM 3405BGW that runs hot. The lowest temp I'm able to achieve under any scenerio is around 275-285 degrees. I've read the instructions thoroughly and consulted w/ the manufacturer. The 1st CFM customer service rep said that the regulator was bad &...
  14. beebeque

    Good Deal on GOSM

    An unbelievable deal! I paid $128. Do you think I should take your photo to WallyWorld and jam it up somebody's.....ah....nose and get a refund? Nah, Its too painful to try to talk to those folks and I'm too happy to finally be smokin'. This weekend its the pork loin w/ Mahogany sauce for...
  15. beebeque

    GOSM wide body for sale

    I don't need a smoker. I recently bought the exact same unit for my 1st smoker. BUT, I gotta tell ya... The pictures you've posted are AWESOME!!! Thats all the inspiration I need to keep learning. You are truly accomplished in the art. (Either that or you're the worlds greatest...
  16. beebeque

    Hello all- Newbie here

    Just my 2 cents... If you're gonna buy a smoker, try to buy one from a store so you can actually go there and see it. (This is not so easy to do here in Atlanta). I bought via the internet from 2 different companies and recieved 1 defective smoker and 4 damaged smokers. The manufacturers don't...
  17. beebeque

    1st Smoke... Ka-Ching!

    Thanks for the PowerToys!
  18. beebeque

    1st Smoke... Ka-Ching!

    Pix of the maiden voyage attached...
  19. beebeque

    1st Smoke... Ka-Ching!

    I wanted to start w/ a no-brainer, so I brined two chickens & used two empty beer-can-chicken racks (to get some smoke action inside the birds). Great result & the cold leftover chicken was even better this morning. I know, I know, pretty boring for you veterans out there, but alot of fun...
  20. beebeque

    Atlanta Newbie...Be Gentle w/ Me!

    I never thought it would be this hard to become a Smoker!!! I've just returned my 4th propane smoker! 1 Defective/3 Damaged by Shipper. Buying via the internet hasn't been fun, but I can't seem to find a decent sized propane smoker at an Atlanta area store. I'm 6 months into my 1st smoker...
Top Bottom
Back
Clicky