Wood chips: foil pack or loose sprinkle?

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

lav25

Smoke Blower
Original poster
Aug 28, 2011
81
34
Osaka, Japan
Sorry if this is the wrong place, but I'm just starting to work on charcoal smoking (ECB), and I've got a question about using wood chips for smoke: 

Is it better (in an ECB) to

A) put my wood chips into a little foil packet with holes poked into it, or

B) sprinkle them loosely over the charcoal? 

I know the best answer is C) get chunks of wood, but unfortunately that doesn't seem to be an option here in Japan.

Thanks for answering what I'm sure has been discussed, but I just can't seem to find.
 
LAV25, evening..... Chips in foil will smoke rather than burn.... that is good..... You can also try adding chips to the bottom of a short can, and put the lid back in it.... That is if the lid remover makes the lid smaller than the can... If the lid is the same size, poke a few small holes in the lid with an awl,ice pick instrument.... that will restrict the air enough that the chips will still smoke....  burn the can first to remove any coating that may be harmful to your health...

Sprinkling over the coals, they may catch fire and burn.... not good.... heat and no smoke....

 Dave
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky