Wiring MES40 power

[igneous]

Need some vets to chime in on how to wire this thing. I have 2 red wires for heating element and what looks like a yellow/green ground(?). My question is — which red goes to SSR + and - terminals or do I wire both together? I pulled power cable out of hole in pic and will cut hole in heating element cover. PID wiring is pretty straightforward.

 

[JC in GB]

The heating element is non-polarized. It does not matter which AC terminal you .use. The yellow green is ground. That need to go to the frame.

Put one red wire on one tab and the other red wire on the other tab.
JC

 

[JC in GB]

I hope that answered your question?

JC

 

[hoity toit]

The heating element is non-polarized. It does not matter which AC terminal you .use. The yellow green is ground. That need to go to the frame.

Put one red wire on one tab and the other red wire on the other tab.
JC

CORRECT ! just like he says..