Wifi controler

[donny88]

Good day everyone
I have the smoke daddy patriot pid controller on my fridge style smoker I built I love the controller but wished I could change the temps away from the home network I would like some sort of set up like the tragaer wifire has someone made there on pid controller system?
Thank you in advance

 

[techieric]

From what I've read there are a couple of wifi enabled controllers out there.

Smoke Daddy - Pellet Grills, BBQ Pellet Grill Smokers & Accessories

Pellet Grills & Smokers by Smoke Daddy. High Quality & Best Pellet Grills, BBQ Smokers, Hopper Assemblies, Smoke Daddy Cold Smoke Generators, heavy Steel Spit Roasters

smokedaddyinc.com

I'm going the other way - I want a non-wifi enabled one! Let me know if you decide to sell your controller, yeah?

 

[donny88]

That is is controller I have the smoke daddy patriot pid

 

[BurntWeenie]

Back in the day of homebrewing I had a system using a Omega PID control setup I made myself

 

[rexster314]

Maybe a Fireboard?

 

[BurntWeenie]

Maybe a Fireboard?

This is not a PID is it?

 

[WVHillbillyinSC]

Good day everyone
I have the smoke daddy patriot pid controller on my fridge style smoker I built I love the controller but wished I could change the temps away from the home network I would like some sort of set up like the tragaer wifire has someone made there on pid controller system?
Thank you in advance

Have you thought about using a Micro Controller like an Arduino or a Raspberry Pi. Sounds like you enjoy building things. Learning how to program in IDE was fun and relaxing. All the Arduino parts are cheap including Input/Output devices. Could probably put together a Wifi enabled device for less than $50. I've putting mine together in stages. I've got two probes (Air and Meat), a 10k Pot for Setpoint and a relay output interface board to control my blower. Everything works well so far. My last stage is to add the Wifi. I have about $30 bucks in it so far, but have enough "Spare" to build 75% of a 2nd one...

 

[2fatpugs]

Hi Donny, you can contact Smoke Daddy to see if they are going to implement a cloud based connectivity anytime soon. They said they were looking into it a year ago.

(around 1:10)

 

[rexster314]

This is not a PID is it?

Very much so, and programmable for step cooking