Too hot

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

ikmon2000

Newbie
Original poster
Aug 17, 2012
17
10
Concord CA. (SF East Bay)
I am having problems keeping my smoke hollow 41170 below 235
I am using the maverick 732 to verify the temp.
Sand in the water tray and pellet tube smoker.

Any helpful hints would be apreiciated!
 
I had the same problem with my GOSM, it wouldn't go below 250*. I installed a needle valve  and with it I could get down to 185* and had a lot better control dialing in the temp. I wanted to go lower (120*) to be able to smoke jerky so I took the side burner off my gas grill (it is about 1" smaller in diameter) and replaced the stock burner in my GOSM with it and now I can get down to 135*.
 
Last edited:
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky