• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Sale! Time to make a Fall run of Andouille!

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

indaswamp

Epic Pitmaster
Staff member
Moderator
OTBS Member
Joined
Apr 27, 2017
Messages
18,315
Reaction score
18,406
Location
South Louisiana-Yes, it is HOT
Been waiting for this....
IMG_20261113_145505830.jpg


Planning on 50 or 60# of Andouille, and might make some sage breakfast sausage with the fatty trim that is left over. I helped my Cousin process 3 deer Thursday. 100# of 50/50 venison/pork ground in 1# meat bags, I threw in 8# of venison in with his to make a 25# run of venison fresh sausage. And he bought a double pack of butts to make 20# of all pork breakfast sausage. Then I go to the store and see the mark down. figures...lol! He paid $2.25/#
 
Will get on this sometime this weekend and at least breakdown the meat off the bone, chunk, salt and cure. But tomorrow I have a water leak to repair. Main shut off valve has cracked. I just replaced that valve about 3 years ago. might have a defect... won't know until I take it off. If I finish that job early, might start cutting meat tomorrow afternoon.
 
Nice price

Is your pork always pumped? I've never noticed it prior.
Most of the twin pack of butts I buy are not pumped. this is the first ones I have bought that are. I will just adjust the salt, cure, and spices down by 12%, and add the extreme minimal water necessary to dissolve the phosphates. It will work for sausage.
 
Life got in the way...had to delay project Andouille. Got the meat deboned and sorted, ground through the 3/4" plate, fat ground through an 8mm plate, rechilled, then through a 3mm plate. With the 12% extra water, I multiplied the final weight of the butt lean by 0.88 for a true meat weight and used that to calculate the seasoning, salt, and cure. I also bought 8# of pork loin for more lean, The pork loin did not have any added water, so this gave me room to add a little water to dissolve the phosphates and the cure accelerator.

Lean ready for the grinder...
IMG_20261118_180043374.jpg


3/4" plate..
IMG_20261118_201927716.jpg

IMG_20261118_201943877.jpg


Mixed the salt, cure #1, and seasonings into the lean to extract proteins and absorb the cure. let rest in fridge couple of hours prior to adding the cure accelerator.
IMG_20261118_235111460.jpg


Fat thru the 8mm plate...
IMG_20261118_233524824.jpg


Fat thru the 3mm plate...
IMG_20261118_234759325.jpg


3 cups of water, STPP, sodium erythorbate. I add this to the fine ground fat and mix that up. this loosens the fat grains prior to adding to the lean. Allows for even mixing and distribution...
IMG_20261118_234801846_HDR.jpg

IMG_20261118_235053953.jpg

IMG_20261119_000318765.jpg


18 chubs + a short one...ready to hit the smokehouse...might cold smoke tonight and then hot smoke in the morning. Stuffed into 52mm hog casings from Craft Butcher's Pantry.
IMG_20261119_005443942.jpg
 
Last edited:
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky