RF Build In Slow Motion (Sinks are done!)
- Thread starter solaryellow
- Start date
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
We got a lot done on the trailer today. First thing we did was box the ends of the frame.
And then moved on to the crossmembers.
Before finally coming to the tongue.
We notched the tongue where it extended past the frame rails and then bent the excess back over the frame rails and welded.
There is a little bit of welding to do next Saturday but should be able to get a coat of Ospho on in the early afternoon and then paint it on Sunday. We are hoping to lift the smoker onto the trailer next Monday.
And then moved on to the crossmembers.
Before finally coming to the tongue.
We notched the tongue where it extended past the frame rails and then bent the excess back over the frame rails and welded.
There is a little bit of welding to do next Saturday but should be able to get a coat of Ospho on in the early afternoon and then paint it on Sunday. We are hoping to lift the smoker onto the trailer next Monday.
gunny r
Fire Starter
jjwdiver
Smoking Fanatic
michael ark
Master of the Pit
- Dec 6, 2007
- 3,848
- 552
Looking good.
Thanks Gunny!
Won't need much more of that popcorn I hope. :o)
Thank you sir.
The plan at this point is to finish welding on Saturday morning, get the frame set up on the axles, apply a coat of Ospho, paint on Sunday and then lift the smoker onto the trailer Monday afternoon. We should have it all wired up Tuesday or Wednesday.
The welding of the frame was completed today and some axles stuck under it.
Swing-away jack was welded on as well.
And the smoker itself was prepped to be moved onto the trailer.
Tomorrow is paint and maybe wiring it up.
Swing-away jack was welded on as well.
And the smoker itself was prepped to be moved onto the trailer.
Tomorrow is paint and maybe wiring it up.
michael ark
Master of the Pit
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Similar threads
Hot Threads
-
I don't get the hate on Pellet Smokers.
- Started by Texascat
- Replies: 31
- General Discussion
-
Not too long ago
- Started by bigfurmn
- Replies: 22
- Blowing Smoke Around the Smoker.
-
Smoked Wing Suggestions
- Started by sandyut
- Replies: 19
- Blowing Smoke Around the Smoker.
-
Coal Bed Getting Too Large
- Started by Its_Raw
- Replies: 15
- General Discussion
-
Home Grown Tomatoes
- Started by Gonna Smoke
- Replies: 13
- Side Items
