Quick question about Pop’s brine

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

buckshot billy

Fire Starter
Original poster
Aug 26, 2017
46
60
Ontario
I’ve just mixed up a 1gal batch of low salt pop’s brine to attempt an eye of round pastrami. Trimmed the roast down to 5lb on the nose then split in two the long way to keep the meat under 2” as I don’t have injection gear. Mixed brine in a 2gal pail until it was clear and tossed meat in where it sunk to bottom and doesnt seem to need additional weight to keep it submerged.

Anyhow, here’s my question: there seems to be a great variation of opinion in how long to keep it brined... How can I determine the correct length of time? I seem to be seeing a range of 8 days to 3 weeks and I’m just curious to hear what others would reccomend and the reasoning behind it to get it cleared up in my mind.

Any advice or other comments on my process are welcome.
 
I cure everything for 2 weeks, I adjust how I cure it.
With pops the way your doing it I would go 2 weeks.

Cure travels 1/2 inch a day is what people say.
 
I agree with Adam 2 weeks is a good set point,I have taken 3 weeks an it seems to get better.
Here is a pic of 1 of 2 that went 20 days used for corned beef,the other is a pastrami that I frooze
100_7634.JPG

Pastrami
100_7662.JPG
 
With a Low Salt Brine, 7 days per inch thick is the minimum. A couple extra days is good insurance. The higher the salt content, the faster it penetrates...JJ
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Great deal on LEM Grinders!

Latest posts

Clicky