Pork rib cooking temp/time?

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

cobble

Smoke Blower
Original poster
Oct 21, 2010
92
29
Boston, MA
Hey guys, just bought my MES 40 and I've got a rack of ribs rubbed up, but the MES manual says 225 for 5 1/2 hours. I thought the standard method was 6 hours on 250 using the 3/2/1? Help!
 
Last edited:
Cobble, Don't go by the MES manual. Use the 3-2-1 method at 225, not 250. These are spare ribs,. right? If they are baby backs do 2-2-1. 
 
Cobble, Don't go by the MES manual. Use the 3-2-1 method at 225, not 250. These are spare ribs,. right? If they are baby backs do 2-2-1. 


The manual did say 225. So 225 is the correct temp? I thought it was 250. When all is said and done, what internal meat temp am I looking for? Or am I just watching for it to pull off the bone? Spare ribs
 
Err..., correction...they are babybacks. Odd thing though, I added wood chips, and I'm not getting much smoke. Just a slight whiff. I'm guessing that its taking time for the chips to dry out. Not sure
 
You should  normally wait until your smoker is up to temp and your getting smoke before you put the ribs in. You don't need billowing smoke. You want what is called TBS (thin blue smoke)  You just want to barely see the smoke coming out. Also if you can smell smoke, your getting  smoke even if it's hard to see.

Like Al said, babybacks 2-2-1

Good luck. And don't forget the Q-View!
 
Last edited:
Don't smoke by time - the meat is done when it's done. Back ribs typically take around 4-5 hours, look for pull back and the bend test. I have never worried about taking the temp of ribs, it's all feel.

Good luck!
 
Don't smoke by time - the meat is done when it's done. Back ribs typically take around 4-5 hours, look for pull back and the bend test. I have never worried about taking the temp of ribs, it's all feel.

Good luck!


I agree Elly, but for someone doing his first rack of ribs, the 2-2-1 method is pretty foolproof. After a few racks & he has the feel for what he's looking for, then he can go by sight.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky