New to smoking - brisket advice

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Giberdan28

Newbie
Original poster
Mar 25, 2020
5
3
Hi there,

I’m new to smoking and am finally getting the chance to take my Smokey Mountain for a spin - looking to do some brisket. Just advice on what you guys would do with this brisket? How I should trim etc? I have hickory and want to try wrapping in butcher paper as I’ve heard this is better? It weighs 4.5lbs.

Cheers
 

Attachments

  • F91CE2DB-FF4C-4DD3-B7CE-1C6FC6EA6C43.jpeg
    F91CE2DB-FF4C-4DD3-B7CE-1C6FC6EA6C43.jpeg
    131 KB · Views: 70
  • DDE0F51E-F358-4002-8753-043B420D82FE.jpeg
    DDE0F51E-F358-4002-8753-043B420D82FE.jpeg
    136.5 KB · Views: 78
Trim any hard fat off as it wont render. Fair warning, that portion of a brisket doesnt look to have a ton of marbling, so it may not get as tender as you hope. But it's a good trial meat. What size WSM do you have?
 
  • Like
Reactions: Giberdan28
It’s the 22” I believe. Many thanks for that, going to trim it up tomorrow so will see how I get on. I shall endeavour to get a more marbled cut next time, but I’m looking forward to trialing. Do you have any advice on wrapping?
 
It’s the 22” I believe. Many thanks for that, going to trim it up tomorrow so will see how I get on. I shall endeavour to get a more marbled cut next time, but I’m looking forward to trialing. Do you have any advice on wrapping?

Wrap once it gets to an IT of 160-165 OR once your bark is pretty well set-up. Sometimes I find myself wrapping at 150 sometimes I wrap at 170. Usually 160-165 is a safe bet on when your bark will be set up. I put the brisket on and leave it alone for about 2-2.5 hours. After that I spritz about every 45 minutes to every hour. This helps the bark set up. Once the meat gets to 190 or so, start probing the meat for tenderness. There should be a little resistance but not much at all. Once its "probe tender" pull it out, and let it rest. If you wrap it in foil, pop that open for 10 minutes or so to let it vent the steam out to limit carryover cooking Then throw it in a cooler if you're not eating until later, or just rest it on the counter if your eating within a couple hours. The best brisket IMO is one that has rested at least 2 hours. Also, when slicing I find I get better results when slicing at an internal temp of around 150 give or take.

You will always be learning in BBQ. I did a 13.5 lb brisket this last weekend and banked on it taking a little longer than it did. Well, it finished about 3 hours earlier than anticipated. So the 3 hour rest I was planning turned into a 6 hour rest haha
 
  • Like
Reactions: Giberdan28
I‘ve attempted the trim, first ever so go easy!
 

Attachments

  • 99CBA54A-0417-4BB1-B6CA-449B508620E6.jpeg
    99CBA54A-0417-4BB1-B6CA-449B508620E6.jpeg
    103.5 KB · Views: 66
I'm watching. If you get a chance look at Arron Franklins videos on cooking brisket. They really do lay out a good base roadmap for smoking brisket. That chunk you have looks like a point but can't tell for sure. A good reliable thermometer is going to be your best friend.

Seems like the majority smoke @ 225 to 250 until the IT reaches 160 +/- then wrap with butcher paper or foil. Continue cooking until the IT reaches 195 to 210 (203 is supposed to be the magic number for IT? maybe?) Their are 1000 rubs and rub recipes for brisket (most of them are good) but Salt & Pepper work about as good as anything. It's a thick piece of meat so don't be shy with your rub. Good luck - keep us updated.

Full Disclosure - I've never cooked a brisket that small.
 
inject with some beef broth. the others have you covered pretty well
 
Well it looks to me like you got a flat with part of the point on top. That is a good thing, because the fat in the point & in between the two will help to keep the brisket moist. There are a thousand Ways to smoke a brisket, use the search feature & just pick one & give it a go. And take detailed notes on rubs, times & temps etc. The more detailed the better. Then you can change anything you need to, after checking your notes the next time. Or if your brisket comes out perfect, then you can just follow your same steps. Good luck!
Al
 
  • Like
Reactions: texomakid
It’s the 22” I believe. Many thanks for that, going to trim it up tomorrow so will see how I get on. I shall endeavour to get a more marbled cut next time, but I’m looking forward to trialing. Do you have any advice on wrapping?
Smoking Al has a great tutorial on smoking a flat only. Might be worth looking up and giving it a read through.
 
  • Like
Reactions: Giberdan28
Where would I find this please?
If you roll up to his signature it's in there.

 
Well, did it today and happy for my first go, the weather didn’t help. Used the tips and advice from you guys and I’m very grateful- I’m sure it wouldn’t have turned out like it did without it. If anything I could have done it for an hour longer and want to get a better bark but for a first go I’m happy. On to the next smoke!
 

Attachments

  • CBC3C878-432A-4BCE-85BE-E0D705D6D581.jpeg
    CBC3C878-432A-4BCE-85BE-E0D705D6D581.jpeg
    220.8 KB · Views: 44
  • C9CADEC3-B08A-4A6F-8BBE-BE3B9E9619C2.jpeg
    C9CADEC3-B08A-4A6F-8BBE-BE3B9E9619C2.jpeg
    234.9 KB · Views: 35
  • Like
Reactions: anstissk
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky