Never cooked on an offset smoker. What should I cook first?

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
7/14 - 8:28 am EST

Good morning everyone

I am in the process of smoking a 5-pound pork butt. I placed it on the grill around 7 am after the temps hit around 275-285 degrees. It has now been cooking for 1 hour and 20 minutes. I am using three probes. One in the pork and the other two monitoring the temps in two different locations under the hood. Currently, those probes are reading 246 & 259. The temp on the hood gauge reads 325.

The temps drop constantly and since 7 am, I have added 3 chunks of post oak and a second helping of lump charcoal. At this rate, I'' go through an entire bag of charcoal and one 10-pound of wood. Is such fluctuation normal? Is this the amount of wood and charcoal I will be going through every single time I want to cook? If so, it seems like a huge waste of money and time.

Any advice is appreciated.

Thank you.

Peace

PS Since I finished typing this, the temps dropped to 212 & 225
 
Running an offset isn't going to be a cheap deal in the city if you have no way to go out and cut your own wood. I live in the desert, hardwood trees don't grow in the desert.
DSC_0001.JPG

To run my SQ36 offset I had to buy bags of wood locally or have them delivered from Cabela's. Smoking a porkbutt I'd usually go thru a 50lb bag of hickory, sometimes more. That was one of the major factors in my deciding to get rid of it last fall and replace it with a 26" Weber kettle. No two ways around it, you can buy yourself a truck and a chainsaw, or just order some wood and lump it, wood ain't free. So smoking a 8lb porkbutt would typically take about $35 and 10-11 hours. RAY

 
Last edited:
  • Like
Reactions: SecondHandSmoker
Last cook I did was a short tip cook and in the 3.5 hours I had the smoker going I used half a chimney of charcoal to start it then like 8 - 10 full splits.
 
That whole idea of biscuits placed through out the smoker is a great one and works really well! Unless you have several probes that are calibrated and you can guarantee as spot on.

Ryan
I mentioned it earlier as well, I think it might have been perceived as a joke but as you say it’s a great way.
 
I just picked up an 8-pound, bone-in pork butt that I will attempt to smoke on Thursday. Wish me luck
You might consider doing some ribs at 250 or so next, before a butt. Butts are very forgiving but you will be into a long cook, if you get the ribs wrong it will be a 4-6 hour cook and you will learn a lot.
 
The first thing I smoked on my offset was a 16 pound brisket. It took 19 hours to smoke. It was exhausting but the brisket was delicious.
Major points for "Ain't Sceered"! Gotta confess brisket is the last thing I would likely choose for the first smoke on an unknown smoker.
 
  • Like
Reactions: jcam222
I will try Al's idea and use the hull to hold the wood/charcoal. Next up will be ribs. I never screwed up ribs in 30 years, so if I have the same issues, then this rig is definitely bye-bye. I listed Thursday afternoon on FB Marketplace, Craigslist, & OfferUp. Not one inquiry yet.
 
That whole idea of biscuits placed through out the smoker is a great one and works really well! Unless you have several probes that are calibrated and you can guarantee as spot on.

Ryan
Biscuit test is great and cheap. I like to use wings too. Gives you the same results as a biscuit but you can eat em when you're done
 
BTW - I'll be cooking for a family of 4
I kinda agree with a pork butt. however if this is your first offset outing. be prepared to babysit nd learn heat management on your offset. it can be a task to not overshoot temps, then maintain with good smoke. it's a long smoke to get it right.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Great deal on LEM Grinders!

Latest posts

Hot Threads

Clicky