My smoker project

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

jbee-smokin

Smoke Blower
Original poster
Feb 25, 2007
144
11
Columbia, S.C.
Well here are the pics of my work in progress. I am using a commercial freezer or refrigerator (not sure). I have taken pictures of the side, front and back to give an idea of the size. Will take more pics as I go along. Notice the hole on the side for my gas pipe, and the small vent hole. I have since enlarged the vent hole thanks to a plasma cutter, and added a second hole on the opposite side. I made the vent holes offset from each other thinking this will create a better airflow, but will know when she is fired up.

JB
09fa99b0_vbattach11800.jpg

b013a3be_vbattach11799.jpg

b5f560a4_vbattach11798.jpg
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Clicky