• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

My smoker project

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

jbee-smokin

Smoke Blower
Joined
Feb 25, 2007
Messages
144
Reaction score
11
Location
Columbia, S.C.
Well here are the pics of my work in progress. I am using a commercial freezer or refrigerator (not sure). I have taken pictures of the side, front and back to give an idea of the size. Will take more pics as I go along. Notice the hole on the side for my gas pipe, and the small vent hole. I have since enlarged the vent hole thanks to a plasma cutter, and added a second hole on the opposite side. I made the vent holes offset from each other thinking this will create a better airflow, but will know when she is fired up.

JB
09fa99b0_vbattach11800.jpg

b013a3be_vbattach11799.jpg

b5f560a4_vbattach11798.jpg
 
Nice work. Keep us posted. Thanks for the pics.

Take care, have fun, and do good!

Regards,

Meowey
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky