Hello !
I built my first Pit !
I am frenchy and i wanted to taste smoked meat ! That's why i built mine.
Thanx a lot for your advices !
I am not a good weldman ! I am violonist !
Be indulgent !
So let me explain.
I weld two gaz tank for the CC. Each contained 13kg. It's standard in France.
I use a third gaz tank as FB.
And i cut a mason's prop as chimney.
I only use some Iron pieces that i found in my garden.
It was fun to re-use some old stuff.
I just increased fb/cc, area under rf and opening rf 1.5 Time.
I wanted to test it, so i burnt wood today and i have a nice blue smoke ! Amazing !!!
I have now to built the grate and the drain and
I bought "sealing gasket" on Amazon.
The only problème is about my chimney.
It is paint inside... I used a plumber torch to burn it. The Iron is now blue but i can't see if the paint burnt inside...
Do you think it will be a problem ?
That's why i Asked about sandblasting.
If it's not a problem, i will high pressure watering before seasoning.
it will be better for me because my knee is actually broked and it's complicated for me to put my smoker on my trailer to bring it to sandblasting man !
i will have a surgery on sept the 12. And i absolutly want to taste smoked meat before !!!
if i don't sandblast it, i will paint the outsider with boiled linseed oil.
if i sandblast, i will paint it black.
i hesitate, let me know please.
Here some pictures.
The cc, the fb, the inlets (upper and down)
Thanx for Reading !
I built my first Pit !
I am frenchy and i wanted to taste smoked meat ! That's why i built mine.
Thanx a lot for your advices !
I am not a good weldman ! I am violonist !
Be indulgent !
So let me explain.
I weld two gaz tank for the CC. Each contained 13kg. It's standard in France.
I use a third gaz tank as FB.
And i cut a mason's prop as chimney.
I only use some Iron pieces that i found in my garden.
It was fun to re-use some old stuff.
I just increased fb/cc, area under rf and opening rf 1.5 Time.
I wanted to test it, so i burnt wood today and i have a nice blue smoke ! Amazing !!!
I have now to built the grate and the drain and
I bought "sealing gasket" on Amazon.
The only problème is about my chimney.
It is paint inside... I used a plumber torch to burn it. The Iron is now blue but i can't see if the paint burnt inside...
Do you think it will be a problem ?
That's why i Asked about sandblasting.
If it's not a problem, i will high pressure watering before seasoning.
it will be better for me because my knee is actually broked and it's complicated for me to put my smoker on my trailer to bring it to sandblasting man !
i will have a surgery on sept the 12. And i absolutly want to taste smoked meat before !!!
if i don't sandblast it, i will paint the outsider with boiled linseed oil.
if i sandblast, i will paint it black.
i hesitate, let me know please.
Here some pictures.
The cc, the fb, the inlets (upper and down)
Thanx for Reading !