My gasket is pulling off the door of my MES and I was going to autozone this weekend to buy some High temp RTV to try and glue it back on. Has anyone used something better that had this problem?
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
Mes Door Gasket
- Thread starter bamafan
- Start date
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
jamminjimi
Meat Mopper
3M 08001 or equivilant in black. AKA Gorilla Snot
aeroforce100
Smoking Fanatic
Now there's a visual I didn't need!
scubadoo97
Smoking Fanatic
The high temp RTV silicone sealer should be fine. You can search for food grade RTV but most of these sealers are pretty much the same. Not going to give off toxic fumes. These emit acetic acid as it cures but that's about it.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Similar threads
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is a community of barbecue and outdoor cooking enthusiasts dedicated to smoking meat.
© 2004-2026 SmokingMeatForums.com
