oleolson
Meat Mopper
My latch broke on my MES last weekend. It looks like the pins or rivets that hold it on came loose. Has anyone else had this problem?
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
Latch Broke on MES
- Thread starter oleolson
- Start date
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
"My latch broke on my MES last weekend. It looks like the pins or rivets that hold it on came loose."
The door latch on my 30" SS MES is attached with screws.
The door latch on my 30" SS MES is attached with screws.
scubadoo97
Smoking Fanatic
The entire assembly is held on by phillip head screws. Two on the door and two on the unit, but the latch is attached with a pin of some sort. Is this the part that came undone?
I've seen photos of extra latches that people added. They looked to be the same type as the original latch. You should be able to pick one up at the local home improvement store and replace the broken one.
I've seen photos of extra latches that people added. They looked to be the same type as the original latch. You should be able to pick one up at the local home improvement store and replace the broken one.
oleolson
Meat Mopper
Yes, that's exactly what came undone. Thanks for getting my brief explanation! Wasn't quite sure I explained it good enough. I'll have to look and see what I can replace it with. Thanks!
Just call Masterbuilt, they should send you a new one.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Similar threads
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is a community of barbecue and outdoor cooking enthusiasts dedicated to smoking meat.
© 2004-2026 SmokingMeatForums.com
