• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Jerky tips for more pro type results

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Getting there...

20220703_091532_resized.jpg
 
Steve H said:
Cut against the grain. 1/4". I do not go by temp. I go by when it is done. Take a piece. And bend it. If you see it just starting to break. You're done. It takes practice. Keep notes. The biggest key is to cut them all at the same thickness to avoid doing a lot of sorting.
Click to expand...
Yup. When doing EOR, I always go against grain. When doin' Salmon Jerky, I cut with the grain. Always try to slice same thickness.
 
You must log in or register to reply here.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Smoking Meat Forums - The Best Smoking Meat Forum On Earth!

SmokingMeatForums.com is a community of barbecue and outdoor cooking enthusiasts dedicated to smoking meat.

© 2004-2026 SmokingMeatForums.com

Quick Navigation

Community

Welcome Guest

Community platform by XenForo® © 2010-2026 XenForo Ltd. Design by: Pixel Exit
System Light Dark
Back
Top
Clicky