• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Is it okay?

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

hooked on smoke

Smoking Fanatic
SMF Premier Member
Joined
Aug 24, 2013
Messages
846
Reaction score
347
Location
Southern California.
Hi,
I started two new hot sauces. It's been in a 3.5% brine for 4 weeks today. I checked on them today and the mango habenero one had a layer of white stuff on top. Is it mold and did i mess this up?
I have been trying to learn to control the heat level and was hoping this round would be a good blend. I hope i didn't ruin this.
Asking for advice from the experts.

Best regards,
 

Attachments

  • 20260704_144907.jpg
    20260704_144907.jpg
    89.4 KB · Views: 3
  • 20260704_144911.jpg
    20260704_144911.jpg
    93 KB · Views: 3
It's called kahm yeast. not harmful, but can affect the flavor. To prevent-sanitize all equipment, use an airtight airlock, make sure all fruit/veggies are submerged, use at least 2% salt brine. Also ensure adequate fermentation for acid production. Others may know more and can share.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky