IQ 110/ Brinmanns Smoke N Pit

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

danbono

Master of the Pit
Original poster
OTBS Member
Feb 19, 2012
1,702
115
North New Jersey Paramus
Hi All I'm considing the IQ 110 for my Brinkmanns Smoke N Pit. Has anyone used the IQ 110 of there Brinkmanns Offset smoker.

Trying to find the best to hook the 110 up to my smoker.

Thanks Dan
 

danbono

Master of the Pit
Original poster
OTBS Member
Thread starter
Feb 19, 2012
1,702
115
North New Jersey Paramus
Hi Here is a pic of my vents/door. Your vent door looks like solid door?

Got some E-mail responses from the IQ company. They suggested the bowl also.

So I just use the toggle nut and tighten that into one of vents and close off the other vents on the door.

Should the smokestack vent be wide open?

Thanks Dan

 

bama bbq

Master of the Pit
Sep 24, 2011
2,353
71
Rocket City (Huntsville) AL
I recall a vent on the door very similar to your schematic. I think the "dog bowl" is your adapter.

I think I ran with exhaust wide open. It was several years ago and I have CRS.
 
Last edited:

danbono

Master of the Pit
Original poster
OTBS Member
Thread starter
Feb 19, 2012
1,702
115
North New Jersey Paramus
Bama BBQ  How good did the IQ 110 work on your offset.

I've read that IF you firebox & pit are NOT sealed well, the 110 does not work as good?

Thanks Dan
 

bama bbq

Master of the Pit
Sep 24, 2011
2,353
71
Rocket City (Huntsville) AL
Bama BBQ  How good did the IQ 110 work on your offset.
I've read that IF you firebox & pit are NOT sealed well, the 110 does not work as good?
Thanks Dan
You are correct. I had a small fortune tied up in sealant until I cut my losses and went WSM.

I ended up selling the Pitmaster. I found it less stressful just to control the vents myself. The WSM makes it VERY easy to do.
 
Last edited:

Hot Threads