Installing aftermarket thermometer

[bobcats110]

I have a WSM 18.5" that I want to install a thermometer in the lid so I don't have to keep opening it to see the over thermometer that I'm currently using.  Any advise on drilling a hole, and where, to get the most accurate readings?  Don't want to mess it up by trial and error.

Thanks! 

 

[bama bbq]

you might go to a Lowe's and measure a newer 18" that has a therm built in.  Are you going with Teltru?

 

[fwismoker]

You can always install a analog thermometer in the lid but remember they aren't super accurate even though some are decent. 

I recommend doing a Maverick ET-732 or such so you can see what your food is as well as your pit.

Here is a mod i did for my drum but will work for the WSM as well.  Doing this you won't have to open the lid nor pinch the probe wires...or lose heat/smoke.

http://www.smokingmeatforums.com/t/140549/maverick-owners-probe-eyelet-solution-sealed

 

[sqwib]

Mine are dead nuts on

I rely more on them than my maverick.
My maverick is best when I'm mobile.