• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

I just had to show you all what I just got.

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
I’m with Bear, a black walnut stain then several layers of tru oil would be really nice.....
 
I was thinking about a dark stain such as that. And, I think I have a can in the garage already.
 
I was thinking about a dark stain such as that. And, I think I have a can in the garage already.

Make sure you sand it good----Dark stain on Pine shows every imperfection.
One little speck of sandpaper grit, between the paper & the wood will show up after staining.

Bear
 
Make sure you sand it good----Dark stain on Pine shows every imperfection.
One little speck of sandpaper grit, between the paper & the wood will show up after staining.

Bear

Oh yeah. I learned that the hard way long ago! I'll be sanding down to 320 grit.
 
I didn't have walnut stain on hand. But I had Windsor oak. So, I used that. Looks pretty good.

PC310025.JPG
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Back
Top
Clicky