How fast should the temperature rise

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

CedarSmoker

Newbie
Original poster
Aug 12, 2024
15
3
1000010954.png


I performed my first test of my electric cedar smoker build. Above is a chart of the results of that test over 30 minutes. My question to the group is whether this is normal, lower than expected, or is it good? Granted, I don't have the seal around the door or the gaps inside sealed yet. The smoker is approximately 18 x24x30 in and has a 1200 watt heating element. I haven't wired in the PID or the SSR yet but I expect the results would be similar.
Any advice or comments are certainly welcomed.
Cheers,
Joe
 
Looks pretty darn fast to me. I smoke sausage and cured meats 130-140, you are there in less than 5 minutes. You are at bbq temp in less than 30 min and just about max safe upper temp for a wood Smokehouse at about 30 min. So I think you have plenty of heat source.
 
  • Like
Reactions: CedarSmoker
With no vents open it looks normal, no meat to act as a sink. that's a lot of heat in a small area gasket or not, think about how much heat comes out of the little area heaters that are about 1200w. And welcome to the site.
 
  • Like
Reactions: CedarSmoker
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky