• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

How big of a smoker will the AMNPS handle?

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

azbohunter

Smoking Fanatic
Joined
Nov 23, 2013
Messages
472
Reaction score
40
Location
Home is Glendale, AZ.
Thinking about building a smoker approximately 24"x 24"x 60" inside measurements.

Will 1 AMNPS 5x8 provide adequate smoke.

I have been using my AMNPS in a MES 30" and overall am happy enough with the results.

Thanks..

Dick
 
You could light both ends at the same time or both ends and the middle for more smoke. But then you'd have to reload more often.
 
That crossed my mind, or I could use two AMNPS, Todd would like that!
biggrin.gif
 
Interesting, I'll be watching to see what answers you come up with

gary
 
i have a smoker much the same size. i have been thru a few different smoke gens and ended up doing the mailbox mod BUT used a cheap turkey roaster cause there are no mail boxes here ...  LOL
so i started with 1 AMNPS then 2 and only lite 1 end. this gives me smoke all night (when they stay lit) for when im doing a pulled pork. i now have 2 12" AMNTS welded together . was sometimes hit and miss if the AMNPS would always stay lit, seemed to crap out in the middle of a smoke sometimes.
these tube smokers just smoke and smoke and smoke. TONS OF SMOKE TOO !!!!!
so i only fill up 1/2 the volume but full length and have not had a problem. uses more pellets than the AMNPS and can get about 8 hrs from it. ya will get longer from the AMNPS  but 8 hrs seems good enough for me to run with and if i miss a bit of time before reload thats ok.

you will find ya never have too many AMNPS / AMNTS laying around cause they are good in the grill also.

Goliath
 
 
i have a smoker much the same size. i have been thru a few different smoke gens and ended up doing the mailbox mod BUT used a cheap turkey roaster cause there are no mail boxes here ...  LOL
so i started with 1 AMNPS then 2 and only lite 1 end. this gives me smoke all night (when they stay lit) for when im doing a pulled pork. i now have 2 12" AMNTS welded together . was sometimes hit and miss if the AMNPS would always stay lit, seemed to crap out in the middle of a smoke sometimes.
these tube smokers just smoke and smoke and smoke. TONS OF SMOKE TOO !!!!!
so i only fill up 1/2 the volume but full length and have not had a problem. uses more pellets than the AMNPS and can get about 8 hrs from it. ya will get longer from the AMNPS  but 8 hrs seems good enough for me to run with and if i miss a bit of time before reload thats ok.

you will find ya never have too many AMNPS / AMNTS laying around cause they are good in the grill also.

Goliath
Great information GOLIATH, thanks. Most times I have great luck keeping my AMNPS lit but I have times?
 
if mine craps out its usually the same spot, where the feet are tacked on and the divider so its like 3 layers of metal and the holes dont seem to line up for air flow. tried a few drill bits but thats tough stuff ...  ha ha ha

Goliath
 
Light both ends and see if that's enough smoke

When I have a few "Scratch & Dents", I throw up on the site

None right now, but keep your eyes open

Todd
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky