Getting ready to start work on a smoker. I found a used hot tar tank on trailer and was wandering if it could be used or not. As in would it be safe to use
Home made trailer smoker
- Thread starter country boy 91
- Start date
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
fatbastard09
Smoke Blower
Post some pics. I used an oil tank and spent a long time with an angle grinder getting the cook chamber down to shiny bare metal. Went through ~30 flapper discs but came out fine.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Similar threads
Hot Threads
-
Crazy Wind - 65-80 Mph tossing semi’s today….
- Started by civilsmoker
- Replies: 40
- Blowing Smoke Around the Smoker.
-
Featured It’s the Season!
- Started by civilsmoker
- Replies: 37
- General Discussion
-
Moving to St. Louis area. Info needed.
- Started by SmokingUPnorth
- Replies: 22
- Blowing Smoke Around the Smoker.
-
Oak leaf #7 cleaver
- Started by Timber II
- Replies: 18
- Blowing Smoke Around the Smoker.
