pink flamingo
Smoke Blower
5-3/4 hours into smoke at 220-230 and rib temp has been stuck at 156. Not much pull back. What to do?
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
Help on ribs.
- Thread starter pink flamingo
- Start date
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
not to many people go by IT for ribs... rather go by the bend test... grab ribs from one end (about half way down) with tongs... hold the slab up in the air.. when ribs bend down close to a 90 degree angle.. they are done... did you check therms for accuracy ? ... just let them keep cooking if they don't past the bend test...
pink flamingo
Smoke Blower
Okay jck, thanks.
Keith is correct - use the bend test on pork ribs.
pink flamingo
Smoke Blower
Thanks for your advice. Everything worked out perfectly.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Similar threads
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is a community of barbecue and outdoor cooking enthusiasts dedicated to smoking meat.
© 2004-2026 SmokingMeatForums.com
