help getting smoker ready

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

willy appleseed

Fire Starter
Original poster
Jan 30, 2016
70
28
was given a smokey mtn.electric smoker there is some mold inside chamber what would be the propper way to clean it before use?  thanks
 
Ten parts water to one part bleach in a spray bottle.  After removing everything inside the smoker except the heating element spray to eliminate airborne mold and scrap/wipe out the mold.  Then wipe with clean water.  Leave open and clean everything you removed with the same spray and rinse.  Put everything back in and heat it at 275*F or so for a few hours then apply smoke for at least an hour. 

-Kurt
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky