• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Flame boss on WSM

daznz

Fire Starter
49
11
Joined Jul 17, 2008
I'm fitting a flame boss 100 to my wsm do I need block all bottom vents with heat tape as my vents don't seal so well. I certainly will be sealing the door up.. do you run the top vent fully open or just open?
Cheers Daza.
 

SmokinAl

SMF Hall of Fame Pitmaster
Staff member
Moderator
OTBS Member
★ Lifetime Premier ★
44,559
6,243
Joined Jun 22, 2009
I have all the vents taped on my WSM/Guru setup.

Yes keep the top vent fully open.

Al
 

lemans

Master of the Pit
OTBS Member
2,899
810
Joined Dec 29, 2013
I'm running a pitmaster IQ120 on my WSM , bottom vents taped top vent wide open.. Didn't seal the door..
Sits at 240 unless I have the top off too long . ( wont do that again)
 

daznz

Fire Starter
49
11
Joined Jul 17, 2008
Thanks for you help guys, My WSM is a old model I've had it for about 16 years the door is very loose so I will silicone a oven seal to it.
 

Latest posts

Hot Threads

Top Bottom
  AdBlock Detected

We noticed that you're using an ad-blocker, which could block some critical website features. For the best possible site experience please take a moment to disable your AdBlocker.