Hi, I'm building my first UDS, I'll only be using it for cold smoking. I noticed there was some surface rust on the inside of the drum. Can I simply use a wire brush to remove the rust or do i have to light a fire inside the drum to remove it.
If I use a wire brush to remove the rust, do I need to season it after as it will only be used for cold smoking. I would of course coat it with spray cooking oil after removing the dust to prevent rust from coming back.
Thank you!!
If I use a wire brush to remove the rust, do I need to season it after as it will only be used for cold smoking. I would of course coat it with spray cooking oil after removing the dust to prevent rust from coming back.
Thank you!!