• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

First build

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Risingjay1

Newbie
Joined
Apr 30, 2022
Messages
7
Reaction score
4
Hello all, Jason here. Just starting a 250 gallon and 100 gallon build. The 250 will eventually be mounted on a trailer for competitionsand the 100 gallon will be for the back yard mounted on a frame with golf cart wheels. Both will be standard offsets. Hope to share pics soon, gad to get a lot of prep work to get to this point as I didn't have the tools to do this project. Newer ti welding too so don't laugh at my noob welds🙂.

I've been lurking here for about 6 years and am finally pulling the trigger.

Thanks
 
Thanks for checking in. A lot of us lurked for years before jumping in. I finally did because I learned so much from this tribe. Be sure to post pictures of your builds.
 
Welcome to the forum from Minnesota! Sounds like you have two great projects in the works. Enjoy your time here!
 
Welcome to SMF from SE GA Jason.
And be sure to.post those pics !

Keith
 
Welcome from Mississippi! Whats the saying..Pics or it didnt happen! LOL! Look forward to your post.
Jim
 
Thank everyone. The part I'm not looking forward to is bringing the cc and fb together with elliptical heads.
 
Hello all, Jason here. Just starting a 250 gallon and 100 gallon build. The 250 will eventually be mounted on a trailer for competitionsand the 100 gallon will be for the back yard mounted on a frame with golf cart wheels. Both will be standard offsets. Hope to share pics soon, gad to get a lot of prep work to get to this point as I didn't have the tools to do this project. Newer ti welding too so don't laugh at my noob welds🙂.

I've been lurking here for about 6 years and am finally pulling the trigger.

Thanks
Welcome to the forums. Looking forward to the project pics.
 
Hello Jason and welcome! Looking forward to following your builds!

Red
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Back
Top
Clicky