Easy little chief mod

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

poeschel

Newbie
Original poster
Jan 28, 2016
2
10
Pittsburgh
Hey guys, new here. I did a lot of lurking before deciding to join here, very cool site. While lurking here and all over the net, I noticed the main mod for little Chiefs was to by a hot plate and swap out the burner and use the temp control. This works great but if your looking for a very fast and easy mod, here's what I did. I bought my first LC about 10 years ago and between a few moves and lots of use, I decided to replace it with a newer one. When I got the new one, I noticed the burner was slightly different (longer). While looking at Smokehouse Products website, I saw the BC burner on new versions is the same length as the LC. So I bought one and swapped it out. Almost a direct replacement besides the front burner support which doesn't matter. I now can get to 250 degrees with a 35 degree ambient in about 25 minutes.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky