• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Dirty Door Temp Gauges

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

flash

Smoking Guru
OTBS Member
Joined
Mar 30, 2007
Messages
5,273
Reaction score
45
Location
Chiefland/Cedar Key, Fl
I was wondering, these tend to get quite dirty over time and wondered if it was worth while to clean them or would a dirty one throw off the readings on these replacement gauges I get from Lowes and such. Those prongs can get pretty nasty looking after quite a few smokes.
 
Actually my Smoke Vault's thermo meter in the door in pretty close to right. Ok get back up now and it's true.
 
Same here, mine is only 20 degrees low.
PDT_Armataz_01_04.gif
 
Not really sure what kind of smoker you have. I put a therm on the lid of my UDS, it's just for reference. I use a steel brush on the probe here and there to remove the buildup.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky