Cutting boards.

[Steve H]

I was wondering why I didn't see the dark pieces on the back side...

Lol! I know. I don't believe I've seen a board like this before. The effect is really interesting.

 

[chopsaw]

A new thing seems to be " picture framed " boards . Double stacked face grain center sections with an edge grain frame around the outside to hide the seam and highlight the center .

Do the same with end grain center , and edge grain frame .

I'm not seeing what your calling out on the joints , but I'm gonna send you a setup I do for all my glue ups on a table saw . Works great , especially on shorter lengths .

 

[Steve H]

A new thing seems to be " picture framed " boards . Double stacked face grain center sections with an edge grain frame around the outside to hide the seam and highlight the center .

Do the same with end grain center , and edge grain frame .

I'm not seeing what your calling out on the joints , but I'm gonna send you a setup I do for all my glue ups on a table saw . Works great , especially on shorter lengths .

Ok, thanks! The fence on the jointer was slightly out of 90 degrees. Which caused a slight cup on my glue ups. Corrected most of it while planing. There is still a very slight cup. If you didn't have a straight edge on it. I doubt you'd notice it.

 

[Steve H]

A new thing seems to be " picture framed " boards . Double stacked face grain center sections with an edge grain frame around the outside to hide the seam and highlight the center .

That sounds interesting. Might give that a go as well.

 

[Steve H]

chopsaw What do you use to apply glue? A month or two ago. I ordered a paint brush on Amazon for 5.00. And got a dozen of these instead by mistake. Told them. They didn't want them back. 12.00 a piece. Ok. Thanks!

Silicone pastry brush. These work great. And the dried glue pulls right off.

 

[chopsaw]

Edge glue ups , I squeeze the glue on from the bottle , then mate the 2 boards together and move them back and forth .
I used that roller top for years . It came with it's own bottle , that I let the glue dry up in . I need to find one that works , or see if they sell a replacement . Be nice if it went right on a normal glue bottle .
For wide surfaces I use that small roller with a foam head . I just let the glue dry on it . Still works .


Those silicone brushes are nice . I have a few that I use at the grill . I like the angle on those .

 

[Colin1230]

Cool thread guys, enjoying following along.

 

[1MoreFord]

Steve, that is actually an excellent idea. As long as the joints in the top and bottom layer don't align you gain added strength by gluing the two layers of thinner boards together.
Plus you can use thinner lumber and avoid the premium some places charge for the thicker stuff.
An even stronger board could be made by turning the layers at 90 degrees to each other.

 

[Steve H]

Steve, that is actually an excellent idea. As long as the joints in the top and bottom layer don't align you gain added strength by gluing the two layers of thinner boards together.
Plus you can use thinner lumber and avoid the premium some places charge for the thicker stuff.
An even stronger board could be made by turning the layers at 90 degrees to each other.

They overlap. I'm not sure how the other layer being 90 degrees could be stronger. More joints. I really don't think the results would be appealing visually speaking. Might even be using more wood. IMHO.

 

[chopsaw]

not sure how the other layer being 90 degrees could be stronger.

Because of the grain direction . That's how laminated sheet goods are made ( plywood ) .
Not needed on a cutting board , but a legit comment on strength .

 

[Steve H]

Because of the grain direction . That's how laminated sheet goods are made ( plywood ) .
Not needed on a cutting board , but a legit comment on strength .

Understand. Just didn't think it would be useful on a cutting board. Or pleasing to the eye.

 

[chopsaw]

Or pleasing to the eye.

Looks like an oops ! Probably how the picture framed boards came about . Someone fixing their mistake .